Overview
The Excalibur Wheel Accessories EXC102B is a 5-1/2 inch closed center cap for steel wheels. Confirm the finish suits your wheel before fitting.
It is a push-thru cap, so it has to suit the wheel itself rather than a vehicle model.
Key features
- Closed center cap design
- Push-thru type
- 5-1/2 inch size
- Universal Fit
Choosing a push-thru cap
A center cap covers the hub at the middle of the wheel and keeps dirt, moisture and debris out of the lug area. Push-thru caps are pressed through the center bore and held by tabs or friction, so their fit depends on how cleanly the bore is formed and whether it is free of paint build-up. Before pressing one in, clean the bore and check that no rust or old paint sits on the edge.
Choosing a cap comes down to the bore size and the finish. The finish should match the wheel’s color and sheen, and the cap should sit flush so it does not rattle over rough roads. Caps are light and cosmetic, so they rarely fail on their own, but a loose or cracked cap should be replaced promptly so it does not work free on the trail.
- Clean the center bore before fitting
- Check the cap sits flush after the first drive
- Replace a cracked or loose cap promptly
Specifications
| Brand | Excalibur Wheel Accessories |
|---|---|
| Part number | EXC102B |
| Type | Center cap |
| Size | 5-1/2 inch |
| Open or closed | Closed |
| Cap type | Push-thru |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for this cap. Match it to your steel wheel before fitting, using the 5-1/2 inch size.
Installation notes
Push-thru caps are pressed into place, so check that the cap seats fully and that its finish suits the wheel.
What’s included
The kit is the center cap only. Check the package contents against your installation before starting.









