Select your vehicle

Energy Suspension Rear Sway Bar Bushing Set 24mm (Red) – 8.5147R

Energy Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear sway bar bushing set for 1990–1997 Toyota Land Cruiser 80 Series
  • 24mm sway bar, red Hyper-Flex performance polyurethane
  • Includes end link bushings
  • Part number ENE8.5147R

Description

Overview

The Energy Suspension ENE8.5147R is a rear sway bar bushing set in red Hyper-Flex performance polyurethane, sized for a 24mm rear sway bar on the 1990–1997 Toyota Land Cruiser 80 Series.

The set includes end link bushings as well as the bar bushings. Those end link bushings replace the rubber at the ends of the sway bar links, where the bar connects to the axle or frame. Energy Suspension says polyurethane lasts much longer than factory rubber, and that a sway bar fitted with it holds its position better under load.

Key features

  • Rear sway bar bushings in red performance polyurethane
  • 24mm sway bar size
  • Includes end link bushings
  • The polyurethane is designed to last longer than factory rubber.
  • It fits 1990–1997 Land Cruiser models.

Rear bushings and ride quality

Rear sway bar bushings control how much the bar can rotate in its brackets, which affects body roll and how the rear axle settles in corners. Polyurethane holds the bar more firmly than rubber, so the rear end can feel more immediate when the body leans. Stiffer bushings also carry more road noise into the cabin, which is worth expecting.

End link bushings are the other half of the rear bar system. They take movement where the links meet the axle or frame, and worn rubber there can cause clunks and a loose feel. Replacing them at the same time as the bar bushings keeps the system working as one unit.

  • Bar bushings and end link bushings
  • Bushing bores clean and undamaged
  • Link fasteners torqued after the first drive
  • Check clearance around the bar

Specifications

Brand Energy Suspension
Part number ENE8.5147R
Position Rear
Color Red
Material Hyper-Flex performance polyurethane
Sway bar diameter 24 mm
Included End link bushings

Vehicle fitment

It fits the 1990–1997 Toyota Land Cruiser, which is the 80 Series generation.

The list covers only the 1990 through 1997 model years, so other Land Cruiser generations are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Polyurethane is firmer than rubber, so the rear of the vehicle will feel firmer over bumps, and the bushings will carry more road noise into the cabin.

What’s included

The kit includes end link bushings for the rear sway bar, along with the bar bushings.

Fitment

VehicleYearsTrims
Toyota Land Cruiser1990–1997Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ENE8.5147R fit a 1998 or newer Land Cruiser?

No. The fit covers only the 1990 through 1997 model years, so 1998 and newer Land Cruisers are outside this set. Check your year, model and trim before ordering.

Does this rear sway bar set include end link bushings?

Yes. The set includes end link bushings, so you get the bar bushings and the link bushings in one kit for the rear sway bar.

What sway bar size is this rear set for?

It is sized for a 24 mm rear sway bar. Measure the bar diameter before ordering if you are unsure, since the bushing bore must match the bar.

How can I tell whether the rear sway bar bushings need replacing?

Look for cracked or crumbling bushings, a clunk when the rear axle moves over bumps, and a bar that sits off-center in its brackets. Worn end links often show the same symptoms. Replace the bushings and links together when either shows wear.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon