Overview
The Radius Arm Bushing, part 4.7110R, is a performance polyurethane bushing for radius arms. It lets the suspension travel through its full range without binding.
The company says worn and soft rubber bushings are a major cause of a vehicle that wanders back and forth on the road. Its polyurethane is offered as the replacement material.
It is sold as a universal fit, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Performance polyurethane construction
- Allows full suspension travel without binding
- Replaces worn rubber bushings
Radius arm bushing inspection
A radius arm holds the axle in position fore and aft while letting it move up and down. Its bushings absorb that movement, so they are under constant load and wear over time. Polyurethane resists deformation better than soft rubber, which is why it is often chosen for this job.
Worn bushings tend to show up as a loose or wandering feel, clicking or knocking under acceleration and braking, and uneven tire wear. Raise the vehicle safely and check the bushing for cracks, gaps or movement against the arm. Inspect both sides, since a worn bushing on one side often means the other is close behind.
Polyurethane bushings can squeak when dry, so a light lubricant made for the material is typically recommended during installation. Check the radius arm mounts and hardware at the same time, because a bent arm or loose bracket will wear a new bushing quickly.
- Cracks or gaps in the bushing
- Clicking under acceleration or braking
- Uneven tire wear
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 4.7110R |
| Type | Radius arm bushing |
| Material | Polyurethane |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering.
Check the bushing size against your radius arm before installing. Confirm your vehicle’s year, model and trim before ordering.










