Overview
The End Of The Road Long Arm Quick Fist Rubber Clamp, part number 40010, is a rubber clamp for holding items from 1/2 to 4.5 inches in diameter. Each clamp supports up to 50 lbs and mounts with two 1/4 inch bolts.
Each package contains two clamps, and they are made in the USA.
Key features
- Holds items from 1/2 in to 4.5 in in diameter
- Supports up to 50 lbs per clamp
- Two 1/4 in bolts for mounting
- Two clamps per package
- Made in the USA
Mounting a rubber clamp safely
Rubber clamps hold round objects by gripping them with a flexible face, which helps protect finishes from scratches. The grip works well when the mounting surface is flat, clean and free of rust or paint buildup that could keep the clamp from seating. Before tightening, test the fit with the object in place so you can adjust the position before the bolts are fully driven.
Rubber softens with heat and can take on a set over time, so inspect clamps periodically and replace any that look cracked, flattened or stretched. When mounting several clamps, keep the spacing even so each one shares the load. Use bolts that match the mounting holes, and tighten evenly so the clamp does not twist as it closes around the item.
- Check the rubber face for cracks
- Tighten both bolts evenly
- Recheck the grip after the first few uses
Specifications
| Brand | End Of The Road |
|---|---|
| Part number | 40010 |
| UPC | 89240240010 |
| Type | Rubber clamp (Long Arm Quick Fist) |
| Diameter range | 1/2 to 4.5 in |
| Size (listed attribute) | 2.5 to 9.5 in |
| Load per clamp | Up to 50 lbs |
| Mounting fasteners | Two 1/4 in bolts |
| Clamps per package | 2 |
| Origin | Made in the USA |
| Fitment | Universal Fit |
Vehicle fitment
The clamp is Universal Fit and is not tied to one vehicle or model. Mounting uses two 1/4 in bolts, so the surface must accommodate both fasteners.
Measure your item before choosing this clamp, since its diameter range is 1/2 to 4.5 in. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Plan two fastener positions on the mounting surface before fastening. Check your object’s diameter against the 1/2 to 4.5 in range.
What’s included
Two clamps per package. Check the package contents against your installation before starting.
