Overview
The Daystar Pro Mount (part KU71108KV) is a billet aluminum action camera mount that attaches POV cameras to round tubing, including roll bars, cages, bumpers and handlebars. It accepts 7/8, 1-1/2, 1-3/4 and 2.00 inch tubing and fits most Pro Style cameras and any POV camera with a 1/4-20 screw mount.
The body is made from 6061 billet aluminum with a fully adjustable ball mount to point the camera in any direction. Kevlar-infused polyurethane spacers dampen vibration without scratching the finish. The mount is built for on- and off-road use, with a silver anodized finish, and black, blue and red options are also available.
Key features
- Fully adjustable ball mount for positioning the camera
- Kevlar-infused polyurethane spacers dampen vibration
- Round tubing fit for 7/8, 1-1/2, 1-3/4 and 2.00 inch diameters
- Universal roll bar mounting system
- Fits most Pro Style cameras and POV cameras with 1/4-20 screw mounts
- Made in the USA
Vibration and camera setup
A camera on a roll bar or cage sees constant vibration from the engine, the tires and the trail. Spacers that absorb shock help keep footage steadier and reduce stress on the camera’s screw thread. Position the camera so it has a clear view forward and does not block the driver’s sightline or a mirror.
Tighten the ball joint enough that the camera holds its angle over rough ground, then recheck after the first few drives. Avoid overtightening on thin tubing, which can crush or deform the clamp surface over time.
Keep a spare 1/4-20 screw handy if you move cameras between vehicles. When clamping onto a bumper or handlebar, confirm the tube is clean and free of rust so the mount sits flat and does not shift during a run.
- Recheck the ball joint after first drives
- Keep cables clear of moving parts
- Clean the tube before clamping
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU71108KV |
| UPC | 618089003722 |
| Body material | 6061 billet aluminum |
| Finish | Silver anodized in the short copy; description also lists black, blue and red |
| Tubing fit | Round 7/8 inch, 1-1/2 inch, 1-3/4 inch and 2.00 inch |
| Camera mount | 1/4-20 screw |
| Vibration dampening | Kevlar-infused polyurethane spacers |
| Kit type | Mounting kit |
| Origin | Made in the USA |
Vehicle fitment
It is a universal camera mount rather than a vehicle-specific part, with no set vehicle years, models or trims. Fit depends on tube diameter: it works with the four round sizes, so measure the roll bar, cage, bumper or handlebar you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the kit to the tube diameter before mounting; the listed sizes are 7/8 inch, 1-1/2 inch, 1-3/4 inch and 2.00 inch. Keep the polyurethane spacers in place, since they are what dampen vibration and protect the finish.
What’s included
The Pro Mount kit with the billet aluminum body, fully adjustable ball mount, aluminum hardware and Kevlar-infused polyurethane spacers.
Not included: the POV camera.












