Overview
The EBC Brakes DP4009R is a Yellowstuff street and track brake pad set with a universal fit, aimed at performance trucks and SUVs. It is the highest-rated friction pad in the EBC brake pad range.
Yellowstuff pads need no warm-up to work at their best, which suits everyday street use. The high-friction compound also suits trucks and SUVs that tow.
Match the pad shape to your vehicle’s brakes before ordering, and confirm the year, model, trim and axle position.
Key features
- Yellowstuff street and track brake pad set
- Highest-rated friction pad in the EBC brake pad range
- Does not require warm-up to perform
- Usable for everyday street driving
- Suited to towing.
- Upgrade-type pad
Bedding in new pads
Bedding in transfers an even layer of friction material onto the rotor, which helps the pads brake smoothly and quietly. Make several moderate stops from moderate speed, allow the brakes to cool between runs, and avoid holding the pedal down at a stop until the brakes are fully cool. Clean, evenly seated pads give the most consistent brake feel.
High-friction pads generate more heat, so check the rotor surface for blue marks, grooves or a rough finish after the first few weeks of driving. Towing and steep grades increase heat, which can shorten rotor life and make the pedal harder to manage.
- Use moderate stops during the first drives
- Check rotor thickness and surface during pad changes
- Keep brake fluid at the level marked on the reservoir
Specifications
| Brand | EBC Brakes |
|---|---|
| Part number | DP4009R |
| Part type | Disc brake pads |
| Series | Yellowstuff |
| Type | Upgrade |
| Fit type | Universal |
Vehicle fitment
It is a universal fit pad for performance trucks and SUVs.
A universal fit does not guarantee the pad shape suits every brake caliper, so check the pad dimensions against your brakes. Match year, model and trim before ordering.
Installation notes
EBC recommends professional installation for all brake pads to ensure your safety and the safety of others. When fitting both front and rear brake pads, EBC recommends using the same compound at both ends, because each compound has unique stopping characteristics and mixing them could compromise the performance of one or both sets.









