Overview
The EBC Brakes GD7463 is a coated, slotted rear brake rotor. It fits the 2007–2014 Ford Expedition and Expedition EL and the 2007–2017 Lincoln Navigator and Navigator L. Wide slots vent hot gases and draw in cooler air.
The slots help keep the braking surface clear of dust and debris, which supports pad life and reduces the chance of brake fade. Slots are less prone to cracking than cross-drilled holes under intense braking. The rotor sits on the rear axle.
Key features
- Rear slotted rotor for 2007–2014 Expedition and 2007–2017 Navigator
- Slots vent hot gases and pull in cooler air
- Keeps the braking surface clear of dust and debris
- Aimed at maximum pad life and reduced brake fade
- Slots resist cracking.
- Coated finish
Rotor wear and replacement
Rotors take the heat of every stop, so their surface and thickness change over time. Look for deep scoring, a lip at the outer edge, heat cracks or blue discoloration. Pulsation in the pedal or vibration under braking often points to uneven thickness or runout, which can be checked with a dial indicator before the rotor is replaced.
Replacing a rotor is also a good time to inspect the hub face, bearing play and caliper slide pins. Clean the hub mounting surface so the new rotor sits flat, and tighten the lug nuts in a star pattern. Bed the new pads after installation, since the rotor and pad surfaces need to transfer material evenly for steady braking.
- Clean the hub face before mounting
- Tighten lug nuts in a star pattern
- Inspect caliper slide pins
Specifications
| Brand | EBC Brakes |
|---|---|
| Part number | GD7463 |
| Part type | Brake rotor |
| Position | Rear |
| Rotor type | Slotted |
| Coating | Coated |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2007–2014 Ford Expedition and Expedition EL and the 2007–2017 Lincoln Navigator and Navigator L.
Expedition model years after 2014 are not on the list, and the part is for the rear axle only. Confirm your vehicle’s year, model and trim before ordering.









