Overview
The Drake Shifter Bezel Trim, part number JP-180008-BL, is a manual shift bezel machined from solid 6061-T6 billet aluminum to replace the factory plastic trim. It is made for 2-door and 4-door models with a manual transmission.
The bezel includes stainless steel mounting hardware. The rubber boot is not included, and the installation requires permanent modification to the original trim.
Key features
- Machined from solid 6061-T6 billet aluminum
- Replaces the factory plastic trim
- Manual shift bezel for manual transmission models
- Includes stainless steel mounting hardware
- Requires permanent modification to the original trim
Before you buy
A shifter bezel is the trim ring that frames the gear lever where it passes through the console or floor. On a manual transmission it covers the gap around the shifter and gives a finished look, and a billet part replaces a plastic piece that can crack or fade over time. Because the trim sits right beside the shifter and boot, it is worth checking clearance by hand before any fitting work.
Look at the old trim for cracks, loose clips and sun fading, since those signs show the part is due for replacement. Mounting hardware should sit flat and snug without forcing the bezel into place. If the boot is worn or missing, plan for a replacement at the same time, so the shifter stays sealed and the new bezel has a clean edge to sit against.
- Check the trim for cracks and loose clips
- Test fit the bezel with the shifter in place
- Inspect the shift boot before reinstalling
- Keep fasteners snug and check them after first drives
Specifications
| Brand | Drake |
|---|---|
| Part number | JP-180008-BL |
| UPC | 70000554631 |
| Part type | Shifter bezel trim |
| Material | 6061-T6 billet aluminum |
| Transmission | Manual |
| Body style | 2 and 4-door models |
| Hardware | Stainless steel mounting hardware included |
| Rubber boot | Not included |
| Fit type | Direct Fit |
Vehicle fitment
It is made for 2-door and 4-door models with a manual transmission. Confirm your vehicle’s year, model and trim fit this bezel before ordering.
Confirm your vehicle’s year, model and trim fit this bezel before ordering.
Installation notes
Tighten all fasteners to specification before driving. Compare the new bezel with the old one before installing, and re-check fastener tightness after the first miles of driving. Because the original trim must be permanently modified, test fit carefully before cutting, and make sure the bezel does not interfere with the shifter or boot.
What’s included
It includes stainless steel mounting hardware. Not included: the rubber boot.












