Overview
The Drake Fire Extinguisher Clamps, part number FIRE-CLMP-S-DAG, are heavy duty T-bar style band clamps that hold a fire extinguisher to a roll bar. The set works with the Drake Fire Extinguisher Mount (FIREX-MNT-DAG): two clamps hold the extinguisher to the mount, and two hold the mount to the roll bar in your vehicle.
Key features
- Heavy duty T-bar style band clamps
- Four clamps in each set
- Pairs with the Drake Fire Extinguisher Mount, FIREX-MNT-DAG
- Secures the mount to a roll bar
Setting up the clamps
Band clamps are only as secure as the surface they grip. On a roll bar, the tube should be clean and free of loose paint or rust before the clamp goes on, because grit between the band and tube can let the clamp slip under vibration. Tighten each T-bar evenly so the band pulls the same on both sides and the mount does not rotate.
Once mounted, recheck the clamps after the first few trail runs, since new bands often settle a little. Look for bent T-bars, stretched bands, and any movement of the mount against the bar. Pairing the clamps with a mount that suits the extinguisher’s diameter keeps the load even, and replacing a worn band early is cheaper than repairing a bent bar.
- Clean the roll bar tube before tightening
- Tighten both sides of each clamp evenly
- Recheck the bolts after the first few trail runs
- Replace bands that show stretching or cracks
Specifications
| Brand | Drake |
|---|---|
| Part number | FIRE-CLMP-S-DAG |
| UPC | 700007364781 |
| Clamps per set | 4 |
| Compatible mount | Drake Fire Extinguisher Mount, FIREX-MNT-DAG |
Vehicle fitment
These clamps are universal fit. Their use depends on the roll bar in your vehicle and the mount you pair them with.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four heavy duty T-bar band clamps per set.
Not included: The fire extinguisher and the mount are not included.









