Overview
This Drake part, number FIREX-MNT-DAG, is a set of four heavy duty T-bar band clamps listed under the name Fire Extinguisher Clamps. The clamps hold a fire extinguisher to the Drake Fire Extinguisher Mount that carries the same part number, and they fasten that mount to a roll bar.
Key features
- Heavy duty T-bar style band clamps
- Set of four clamps
- Two clamps secure the extinguisher to the mount
- Two clamps secure the mount to a roll bar
Roll bar and mount compatibility
Compatibility starts at the roll bar. A tube that is too large or too small for the clamp body will leave the band loose or force it past its range, so measure the bar before choosing a set. Check that the mount sits flat against the tube and that the extinguisher can be lifted out without touching the bands.
When you pair this set with an extinguisher, consider the weight and diameter of the cylinder. A heavier unit puts more load on the lower clamp, so make sure both clamps are tight and evenly spaced. Keep the mounting area free of sharp edges that could rub through a strap over time, and inspect the set regularly for wear.
- Measure the roll bar tube before buying
- Confirm the mount sits flat against the tube
- Space the clamps evenly around the cylinder
- Inspect bands for wear after each season
Specifications
| Brand | Drake |
|---|---|
| Part number | FIREX-MNT-DAG |
| UPC | 700007364801 |
| Clamps per set | 4 |
| Compatible mount | Drake Fire Extinguisher Mount |
Vehicle fitment
This set is universal fit. Fit depends on the roll bar in your vehicle and the extinguisher mount you use.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Four heavy duty T-bar band clamps per set.
Not included: Neither the extinguisher nor the mount comes with this set.









