Overview
The H3R Performance NB300 is an Extreme Duty quick release bracket for 3-inch diameter fire extinguishers, part number NB300. It works with H3R MX250 and HG250 extinguishers and mounts to an H3R seat mount or a flat surface. The bracket is not a vehicle part, so it has no vehicle fitment.
The bracket is built for off-road and racing use. It uses fiberglass reinforced nylon and corrosion resistant hardware, and it is patent pending.
Key features
- Quick release design for fast extinguisher deployment
- Extinguisher cannot accidentally disengage from the bracket
- Includes a pull to release flag
- Meets MIL SPEC 810G
- Withstands inertial loads in excess of 18G in all directions
- Fiberglass reinforced nylon construction with corrosion resistant hardware
- Mounts on H3R seat mount or flat surface
Mounting for quick access
A quick release bracket is only as good as its mounting surface. Before installing, confirm the seat mount or flat surface is solid and free of cracks, and that the extinguisher can be pulled straight out without hitting nearby gear. In an off-road or race setup, position the unit where the driver or crew can reach it while buckled in, and keep the release flag clear of straps and cables.
Over time, check the nylon body for cracks, inspect the hardware for corrosion, and confirm the extinguisher still seats and releases smoothly. Vibration can loosen fasteners, so recheck them after rough runs. Replace the bracket if the release flag or latch wears, or if the body shows damage, since a worn mount can let the unit shift or fall.
Specifications
| Brand | H3R Performance |
|---|---|
| Part number | NB300 |
| UPC | 856991001478 |
| Extinguisher diameter | 3 in. |
| Compatible extinguishers | H3R MX250 and HG250 |
| Construction | Fiberglass reinforced nylon |
| Hardware | Corrosion resistant |
| Specification | MIL SPEC 810G |
| Load rating | In excess of 18G in all directions |
| Release | Pull to release flag |
| Weight | 14 oz |
Vehicle fitment
The bracket mounts an extinguisher rather than attaching to a vehicle, so it has no vehicle fitment. Confirm the extinguisher model and mounting surface are compatible before ordering.
Installation notes
Choose either the H3R seat mount or a flat surface before mounting, and confirm the surface is solid. Check that your fasteners suit the surface before installing.
What’s included
The bracket comes with a pull to release flag.
Not included: The fire extinguisher. Pick a compatible H3R MX250 or HG250 model.














