Overview
The Daystar KU71109RB is a blue Pro Mount accessory mount that clamps to tubular roll bars so you can add accessories such as fire extinguishers, flashlights and light bars. It uses two 6061 billet aluminum roll bar clamps with Kevlar-infused polyurethane spacers, so one kit can grip several tube diameters. Daystar designs it for most tubular roll bars and names universal fit.
Because the Pro Mount is an accessory mount rather than a vehicle-specific part, the key check is whether your roll bar tubing matches one of the four spacer sizes in the kit.
Key features
- Two 6061 billet aluminum roll bar clamps
- Eight Kevlar-infused polyurethane spacers, one set for each tube size
- Spacers sized for 7/8 inch, 1-1/2 inch, 1-3/4 inch and 2 inch tubing
- Anodized blue finish
- Designed to hold fire extinguishers, flashlights, light bars and similar accessories
Securing gear to a roll bar
Roll bar mounts work best when weight sits close to the bar and is spread across the clamp points. Heavy items such as fire extinguishers and light bars shift under bounce, so plan the layout before tightening. Keep wiring for lights and accessories clear of moving parts, and avoid placing gear where it could strike a passenger during a sudden stop.
Recheck the clamps after the first few trail runs, since vibration can loosen fasteners and let spacers settle. Polyurethane spacers and aluminum clamps can be damaged by overtightening, so tighten evenly and check for gaps. Inspect the roll bar for cracks or deformed tubing around the mounts before adding weight.
- Plan the layout before tightening
- Keep wiring clear of moving parts
- Recheck clamps after the first trail runs
- Inspect the tubing around the mounts
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU71109RB |
| UPC | 618089010324 |
| Clamp material | 6061 billet aluminum |
| Spacer material | Kevlar-infused polyurethane |
| Finish | Anodized blue |
| Tubing sizes | 7/8 inch, 1-1/2 inch, 1-3/4 inch, 2 inch |
| Kit contents | Two roll bar clamps, eight spacers |
Vehicle fitment
No specific vehicle is named for this mount. It is a universal accessory mount for tubular roll bars, so compatibility depends on the diameter of the tube you clamp to, not on make, model or year.
Measure your roll bar tubing and match it to one of the four spacer sizes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Select the spacer set that matches your tube diameter. Each size comes as its own set, so use only the set that fits the tubing you are clamping to.
What’s included
Two 6061 billet aluminum roll bar clamps and eight Kevlar-infused polyurethane spacers, one set of each size.
Not included: the accessories you mount, such as fire extinguishers, flashlights or light bars.









