Overview
The Daystar License Plate Retainer Bracket, part number KU70040RE, is a red polyurethane bracket that holds a license plate on the front of a vehicle. It mounts on a Daystar Winch Hook Isolator, which must be in place first. It is made in the USA and is a universal fit part.
Key features
- Mounts the license plate on the front of the vehicle
- Requires a Daystar Winch Hook Isolator to mount
- Drilling is not required
- Red polyurethane construction
- Made in the USA
- Installation is straightforward and does not require drilling.
Front plate mount checks
A front license plate holder has to clear the grille, the bumper face and any winch hardware without interfering with the hood latch or the radiator. Before mounting, look at how the plate sits when the vehicle is loaded with a winch and recovery gear, since that changes the angle more than most people expect. A bracket that rests on a hook isolator depends on that isolator staying tight, so check the connection after the first few drives.
Plates should stay readable and secure on rough ground. Vibration can loosen the fasteners that hold the plate to the retainer, so tighten them periodically and inspect the plate edges for cracks in the polyurethane after hard use. Polyurethane handles abrasion well but can split if it is pinched against a sharp edge, so keep it clear of recovery straps and shackles.
- Check hook isolator bolts after the first trail runs
- Keep the plate clear of the winch line path
- Replace the retainer if the mounting tab cracks
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70040RE |
| UPC | 618089004903 |
| Color | Red |
| Material | Polyurethane |
| Drilling required | Drilling is not required |
| Light | Does not include light |
| Fitment type | Universal fit |
| Mounting | Front, on a Daystar Winch Hook Isolator |
Vehicle fitment
The bracket is a universal fit that mounts on a Daystar Winch Hook Isolator at the front of the vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit the Daystar Winch Hook Isolator first, because this bracket attaches to it. Drilling is not required.
What’s included
The bracket only. The light and the Daystar Winch Hook Isolator, which the bracket requires to mount, are not included.
Not included: The light, and the Daystar Winch Hook Isolator that the bracket requires to mount.












