Overview
The Daystar License Plate Retainer Bracket KU70040BK is a black polyurethane bracket that mounts a license plate on the front of a vehicle. It mounts to the Daystar Winch Hook Isolator, which is required for mounting.
The bracket keeps a vehicle legal and functional with the plate in the front position. It is made in the USA and is not tied to a specific make, model or years.
Key features
- Mounts the license plate on the front of the vehicle
- Requires the Daystar Winch Hook Isolator to mount
- Polyurethane construction
- Made in the USA
- Straightforward to install
Isolator and winch setup
A winch hook isolator sits between the winch line and the hook, cushioning the hook when the line is loaded and keeping the attachment point tidy. A plate retainer that mounts to it depends on that isolator staying in good condition, so inspect it before each recovery.
Check the isolator for cracks, flattened areas and worn stitching or mounting points, and replace it when damage shows. Keep the bracket clear of the winch line path and the fairlead rollers, and avoid winching at angles that pull the plate against the bumper. Recheck fasteners after rough trail use.
When choosing a setup, confirm that the isolator matches the Daystar part and that the plate position leaves room for lights and airflow to the radiator.
- Inspect the isolator before recovery work
- Keep the winch line clear of the plate
- Recheck fasteners after rough trail use
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU70040BK |
| UPC | 618089004897 |
| Color | Black |
| Material | Polyurethane |
| Made in | USA |
| Requires | Daystar Winch Hook Isolator |
| Drilling | Not required |
Vehicle fitment
The bracket is not tied to a specific make, model or years. Fit depends on the Daystar Winch Hook Isolator it mounts to.
Check that the isolator is the Daystar Winch Hook Isolator before fitting. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket mounts to the Daystar Winch Hook Isolator, so the isolator must be in place first. Installation is straightforward and does not require drilling.
What’s included
The license plate retainer bracket.
Not included: The Daystar Winch Hook Isolator, which the bracket requires to mount.














