Overview
The Warrior 1563 is a corner mount license plate bracket with an LED light for the 2007-2016 Jeep Wrangler JK, including Unlimited, Rubicon, Sahara and Sport models. It mounts in the same location as the factory license plate bracket and replaces the OE plastic bracket with a steel one.
The bracket is made from 11-gauge HRPO steel plate and comes with all of the mounting hardware. The lighted version includes a triple LED marker light. Installation requires drilling, so confirm the position before you start.
Key features
- Mounts in the same location as the factory license plate bracket
- Steel bracket replaces the weaker OE plastic bracket
- 11-gauge HRPO steel plate construction
- Triple LED marker light included in the lighted version
- Black corner mount finish
- Hardware included
- Designed for 2 and 4-door models
Corrosion protection after drilling
Installation on this bracket involves drilling into steel that is exposed at the rear. Bare metal at the holes can start to rust within a short time, especially in wet or salted conditions. After drilling, clean the edges and treat them with a matching touch-up paint or primer before the hardware goes in, so the cut surfaces are protected from the start.
Corner-mounted plates also deal with trail spray and washing, so inspect the holes and the bracket edges at regular intervals. Tighten the included hardware evenly and check it after the first few drives, since steel brackets can settle into the mounting surface. If the paint lifts around the fasteners, touch it up promptly.
- Deburr hole edges before fitting the hardware
- Use touch-up paint on bare metal
- Check fasteners after the first few drives
- Inspect around the holes each season
Specifications
| Brand | Warrior |
|---|---|
| Part number | 1563 |
| UPC | 634146015637 |
| Material | 11-gauge HRPO steel plate |
| Finish | Black |
| Light | Triple LED marker light, included with the lighted version |
| Drilling | Required for installation |
| Body styles | 2 and 4-door models |
| Hardware | Mounting hardware included |
Vehicle fitment
The bracket fits the 2007-2016 Jeep Wrangler JK, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, along with the Unlimited versions of those trims.
Only the 2007-2016 JK range is covered, so earlier TJ and LJ bodies and later JL models do not fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bracket requires drilling, mark the holes carefully and compare the plate position against the factory bracket location before you drill. Mount the steel bracket where the factory bracket sits and secure it with the included hardware. Wear eye protection while drilling.
What’s included
The bracket comes complete with all of the mounting hardware. The lighted version comes with a triple LED marker light.












