Select your vehicle

Daystar Hood Pin Kit – KU71104RE

Daystar

Shop Daystar Hood Pin Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Polyurethane grommet hood pin kit
  • Daystar part number KU71104RE
  • 5/8″ steel pin, stainless steel fasteners and spring retaining clip
  • Sold individually; vehicle fitment not listed

Description

Overview

The Daystar KU71104RE hood pin kit centers on a polyurethane grommet that isolates the hood from its attachment points. Fiberglass hoods can crack at their mounting points without grommets.

Each kit contains a steel pin of 5/8″ diameter, stainless steel fasteners and a spring clip that secures the pin. Kits are sold one at a time because not every hood uses an even number of pins.

Key features

  • Polyurethane grommets
  • Grommet allows controlled flex in fiberglass hoods
  • 5/8″ diameter steel pin
  • Stainless steel fasteners
  • Spring retaining clip

Grommet care and hood fit

The grommet does most of the work in this type of hood pin, because it lets a fiberglass hood flex while keeping it attached. Polyurethane ages with heat and sun, so a grommet that was once firm may harden or split over time. Check the grommet any time the hood is removed or the pin is loosened.

When setting up pins, the goal is an even hold across the hood. Make sure each pin sits square and the grommet is not pinched, and tighten the fasteners evenly rather than fully on one side. Hood alignment can shift after the first few drives, so check the gap around the hood again after a short test run.

  • Look for splitting or hardening on grommets
  • Set each pin square to the hood edge
  • Recheck hood gaps after a short drive

Specifications

Brand Daystar
Part number KU71104RE
UPC 618089003630
Pin diameter 5/8″ steel
Grommet material Polyurethane
Fasteners Stainless steel
Retainer Spring retaining clip
Sold as Individually

Vehicle fitment

The kit is a universal fit, so no specific year, make, model or chassis code applies. Check your hood and mounting points against the pins before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the kit is sold one at a time, check how many hood pins your vehicle needs and order accordingly.

What’s included

Each kit includes a 5/8″ steel pin, a polyurethane grommet, stainless steel fasteners and a spring retaining clip.

SKU: DAYKU71104RE Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 7.80 × 4.80 × 4.00 in
brands

Questions & Answers

How is the Daystar KU71104RE different from the KU71104BK?

The part numbers differ: KU71104RE versus KU71104BK. Both kits share the same pin, grommet and fastener set, so confirm the exact suffix before ordering.

What is the grommet for on the KU71104RE?

The polyurethane grommet isolates the hood from its attachment points. It lets the fiberglass flex in a controlled way, which helps prevent cracking at the mounting points.

Does the Daystar KU71104RE include a full set of pins?

No. Each kit is sold individually. Count your vehicle's hood mounting points before ordering to know how many kits you need.

What should I replace along with the grommet?

Replace the spring retaining clip and stainless fasteners if they show rust or wear, since they hold the pin in place with the grommet. Keep matching parts together for each mounting point so the load stays balanced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Daystar Hood Pin Kits on Amazon