Overview
The Dana Spicer 3-94-18X is a U-bolt kit for retaining universal joints in driveline yokes. It is made for most 1350 and 1410 yokes with 1.188 in cup series cups and 1.666 in center-to-center bolt spacing. Hard-use off-road driveshafts commonly rely on U-bolts, and Dana Spicer has manufactured them for over 60 years.
Key features
- U-bolt joint retention for driveline yokes
- Fits most 1350 and 1410 yokes with 1.188 in cup series cups
- 1.666 in center-to-center bolt spacing
- Dana Spicer U-bolt design with a manufacturing history of over 60 years
Keeping U-bolts square
U-bolts work by spreading clamping load evenly around the joint cup, so alignment during assembly matters. Start each U-bolt by hand and keep it square to the yoke while the nuts are drawn down evenly. Cocking the U-bolt can bind the cup, damage the threads and make it difficult to tell whether the joint is fully seated.
Hard-use driveshafts see shock loads from rock crawling and sudden throttle changes, so check U-bolt tightness after the first few trail runs. Look for shifting cups, uneven gaps around the yoke ears and any grease seepage. Joints that work loose tend to wear the yoke bores, and worn bores make later installs harder, so catch movement early.
- Start threads by hand
- Tighten evenly across both U-bolts
- Recheck tightness after the first trail runs
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 3-94-18X |
| UPC | 23913123048 |
| Yoke compatibility | Most 1350 and 1410 yokes, 1.188 in cup series |
| Bolt spacing | 1.666 in center to center |
Vehicle fitment
It is matched by yoke size rather than by vehicle, so confirm that your yoke matches the cup size and bolt spacing shown above.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your yoke cups and bolt spacing before installing, and keep the U-bolts square to the yoke during assembly.
What’s included
Check the package contents against your installation before starting.









