Overview
The Curt Manufacturing Ratchet Strap, part number 83009, is a 10 ft long tie-down strap that is 1 in. wide. It has a 500 lb work load and a 1500 lbs break strength, and it comes as a 2 pack. The strap is a general tie-down rather than a vehicle-specific part.
Key features
- Rubber coated hooks
- Black finish
- 1500 lbs break strength
- 500 lb work load
Securing cargo with straps
A ratchet strap holds cargo by tension, so the anchor points and the way the load sits matter as much as the strap itself. Run the strap over the load rather than against sharp edges, and use corner protectors where the webbing would bend tightly. Ratchet the strap until it is snug, then check it again after the first few miles, since loads settle and webbing can stretch slightly. Never let the handle swing free, as a loose tail can snag on the vehicle.
Inspect the webbing for fraying, cuts, glazing or burn marks before each use, and retire any strap with damage at the stitching or hooks. The rubber coated hooks should seat firmly on the anchor and not be bent open. After use, release tension slowly, coil the strap loosely and keep it dry so the fabric does not mildew. Store straps away from fuel and solvents, which can weaken webbing over time.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 83009 |
| UPC | 612314830091 |
| Length | 10 ft |
| Width | 1 in. |
| Break strength | 1500 lbs |
| Work load | 500 lb |
| Hooks | Rubber coated |
| Color | Black |
| Quantity | 2 pack |
Vehicle fitment
This ratchet strap is universal and is not vehicle-specific. Check that the 10 ft length suits your load and anchor points before use.
Installation notes
Do not exceed the 500 lb work load shown in the specifications when securing cargo.
What’s included
The package is a 2 pack of ratchet straps with rubber coated hooks.








