Select your vehicle

Curt Manufacturing 16′ Cargo Straps with S-Hooks, 4 Pack (Red) – 83002

Curt Manufacturing

Shop Curt Manufacturing Tie Down on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Universal fit cargo straps, not tied to a specific vehicle
  • Part number CRT83002, 16′ length, 1″ woven nylon strap width
  • Ratcheting buckle with rubber-coated S-hooks
  • 500 lb work load limit and 1,500 lb break strength
  • Four red straps included

Description

Overview

The Curt Manufacturing 16′ Cargo Straps with S-Hooks, 4 Pack (Red), part number CRT83002, is a set of four red ratchet tie-down straps for securing cargo. Curt Manufacturing lists them as universal fit, so they are not built for one specific vehicle and can be used on a trailer or in a vehicle’s cargo area.

Curt Manufacturing argues that wrapping rope around a load or relying on a net of bungee cords can be unsafe, because a single bungee that pops loose can release the load. The straps are made from high-strength woven nylon with a ratcheting buckle, which the brand says allows superior tension on the load. They are designed for larger, heavier loads and belong to Curt’s cargo management line, which is offered in several colors, lengths and hook types.

Key features

  • Woven nylon strap with a ratcheting buckle for tension on the load
  • Rubber-coated S-hooks for a secure hold
  • Hooks described by Curt Manufacturing as resistant to corrosion and wear
  • Designed for larger, heavier loads
  • Four straps included in the package
  • Red straps with a 16′ total length and 1″ strap width

Matching straps to your load

Choosing cargo straps starts with the load rather than the vehicle. Four 16-foot straps give enough length to reach across a typical trailer bed and wrap around a load, while the 1 inch width spreads pressure across soft packaging. Count your anchor points first, then pick a strap length that reaches them with a little slack left for tightening.

Ratchet buckles are useful for loads that need steady tension, but tighten them in short steps. Overtightening can crush cardboard, soft bags and boxes, so stop once the load is firm and does not shift when you push on it. Recheck the tension after the first few miles, since cargo can settle as a trip begins.

A strap rated for a 500 lb work load limit suits light and medium loads. For heavier loads, look for a higher work load limit or use multiple straps side by side. Keep the red webbing clean and dry, and replace any strap that shows cuts, heavy fraying or a worn buckle.

Specifications

Brand Curt Manufacturing
Part number CRT83002
Product type Cargo straps with S-hooks (ratchet tie-down)
Quantity 4 straps (4 pack)
Color Red
Total length 16′
Strap width 1″
Material High-strength woven nylon
Hook type Rubber-coated S-hooks
Break strength 1,500 lbs
Work load limit 500 lbs
Category Towing > Cargo Management

Vehicle fitment

Curt Manufacturing lists these straps as universal fit, so no year, make, model or trim applies. Check that the 16′ length and the 500 lb work load limit suit your load and your tie-down points.

Because the product is not vehicle-specific, there is no vehicle list to check against. Match the strap length, width and work load limit to your cargo instead.

Installation notes

The buckle is a ratchet, so tighten the strap gradually and keep hands and body clear of the strap while it is under tension. Keep each load within the 500 lb work load limit, which is well below the 1,500 lb break strength.

What’s included

Four red 16′ cargo straps with S-hooks and ratcheting buckles.

Not included: Anchor points, trailer tie-down rails and cargo bars are not included with the straps.

SKU: CRT83002 Categories: , ,

Questions & Answers

Do these straps fit a specific vehicle?

No. Curt Manufacturing lists these 16' cargo straps as universal fit, so they are not tied to one year, make, model or trim. Choose them by strap length, the 1" strap width and the 500 lb work load limit, and check that those suit your load and tie-down points.

What are the work load limit and break strength?

The work load limit is 500 lbs and the break strength is 1,500 lbs. Keep each load within the 500 lb work load limit rather than the higher break strength, since break strength is the failure point.

Do the straps come with S-hooks?

Yes. Each of the four straps has a ratcheting buckle and a rubber-coated S-hook. The S-hooks provide a secure hold and resist corrosion and wear.

What material and size are the straps?

They are made of high-strength woven nylon, measure 16 feet in total length and have a 1 inch strap width. The part number is CRT83002, and the package is red.

How should I store cargo straps between trips?

Store them dry, coiled loosely and out of direct sunlight. Keep the hooks and buckles away from sharp tools, since abrasion and heat weaken webbing over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Curt Manufacturing Tie Down on Amazon