Overview
The Crown Automotive front door check, part number 55235571AB, is a door check for the front door position, labeled universal fit.
A door check is a link that limits how far a door opens. Compare its position and mounting points against your vehicle before ordering.
Key features
- Front door position
- Universal fit
- Part number 55235571AB
- Crown Automotive brand
Door check care and fit
A door check holds the door at a set open angle and keeps it from swinging past its limit. Over time the pivot pins and bushings wear, and a worn check can let the door drop, rattle or open too far. Rust on the arm and pin is also common in areas where roads are salted. A bent arm should be replaced rather than straightened.
When replacing one, compare the arm length, pin style and mounting holes with the old part, and check the door hinges for play before fitting. Adjusting the door striker or hinge alignment may be needed after installation so the door closes evenly. Grease the pivot points with a light lithium-based lubricant to slow wear and quiet squeaks.
- Look for rust on the arm and pin
- Check hinge play before replacing the check
- Replace worn pivot bushings with the check
- Test door open and close for even movement
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55235571AB |
| Part type | Door check |
| Position | Front |
| Fitment listed | Universal fit, no vehicles named |
Vehicle fitment
No specific vehicle, year or model is identified for this door check. Universal fit does not confirm a match to a particular vehicle, and door checks are often sized to a specific door, so confirm the match for your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Plan for brackets, hardware and mounting parts separately. Confirm what you need against your installation plan before ordering.









