Overview
The Crown Automotive 33003521 is a valve retainer lock keeper with one cut groove at the top. A valve lock keeper, also called a valve locker, holds the valve retainer onto the valve stem.
It carries a Universal Fit designation, and it is intended for Jeep Cherokee (XJ), Comanche, Grand Cherokee (ZJ), Wagoneer (SJ) and Wrangler (YJ) models.
Key features
- One cut groove at the top of the keeper
- Designed to hold the valve retainer on the valve stem
- Crown Automotive replacement part
- Universal Fit designation
Choosing and fitting keepers
Valve keepers, also called locks, clamp onto the valve stem and hold the retainer in place while the engine runs. A keeper that is worn, mismatched or seated poorly can let the valve move under load, so the groove and the keeper’s taper should be checked against the valve stem before assembly. Keepers are usually replaced in pairs with the retainer when the valve train is serviced.
Work with the spring compressed only as far as needed, and keep the keepers from dropping into the head. Use light grease to hold them in place while the spring is released, then confirm both keepers seat evenly before turning the engine over. Wear often shows up on the groove edges, so inspect them for chips or flat spots whenever the valve train is open.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 33003521 |
| UPC | 848399011722 |
| Part type | Valve retainer lock keeper |
| Groove | 1 cut groove, top |
| Fitment label | Universal Fit |
Vehicle fitment
The manufacturer fitment list names Jeep Cherokee (XJ) 1987–1996, Jeep Comanche 1987–1992, Jeep Grand Cherokee (ZJ) 1993–1996, Jeep Wagoneer (SJ) 1987–1990 and Jeep Wrangler (YJ) 1987–1995.
Check your vehicle’s year, model and trim against the coverage before buying.
Installation notes
Replacing valve keepers usually means compressing the valve spring, so a valve spring compressor is the common tool for the job. A failed keeper can let the valve drop into the cylinder, so work carefully and check the seating before running the engine.
What’s included
Confirm the number of keepers in the package before starting the job.









