Overview
The Crown Automotive Vacuum Switch O-Ring Seal, part number 4338942, is an O-ring for the vacuum switch on NP231 or NP242 transfer cases. It seals the vacuum switch connection on those cases.
Crown Automotive offers this O-ring among its transfer case parts. Confirm the seal size against your switch port before installing.
Key features
- O-ring seal for the vacuum switch
- It is made for NP231 or NP242 transfer cases.
- Crown Automotive part number 4338942
- UPC 848399003482
Replacing a vacuum switch seal
An O-ring on a vacuum switch works as a small gasket. It keeps vacuum from leaking past the switch threads, so the vacuum lines that run through the switch can hold their pressure. Small seals like this tend to fail through hardening, flattening or nicks made during removal rather than from sudden damage.
When the switch comes out, look at the groove and the sealing surface for scoring or debris before fitting the new ring. Clean the area with a lint-free cloth and a small pick that will not gouge the metal. Lightly coat the new O-ring with a lubricant compatible with transmission and transfer case fluids, then seat it fully before the switch goes back in.
- Inspect the switch port for scratches or old residue
- Keep the ring clean and free of dirt before fitting
- Check for leaks with the engine running after reassembly
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4338942 |
| UPC | 848399003482 |
| Part type | O-ring seal |
| Used on | Vacuum switch |
| Transfer cases | NP231 or NP242 |
Vehicle fitment
It fits NP231 or NP242 transfer cases. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Work with the transfer case cool and the vehicle supported on jack stands before removing the vacuum switch.
What’s included
The O-ring seal, part number 4338942.
Not included: The vacuum switch itself is not part of this item.









