Overview
The Crown Automotive J0648594 is a front rubber leaf spring shackle bushing for 4 wheel drive Jeep vehicles, and four are needed per vehicle. Crown Automotive has made replacement parts for Jeep vehicles for over 50 years. Use it when replacing the front shackle bushings on a leaf spring setup.
It carries a Direct Fit label. Confirm fit for your Jeep’s year, model and trim before ordering.
Key features
- Front position
- Rubber construction
- Designed for 4 wheel drive vehicles
- Four required per vehicle
- Labeled Direct Fit
Replacing front shackle bushings
Front leaf spring shackle bushings take the sideways and fore-aft movement of the spring as the axle moves. When they wear, the shackle gets loose, and the vehicle can feel vague or knock over bumps.
Rubber bushings deteriorate with heat, sunlight, oil and age. Inspect them for cracks, splitting and flattening, and check the shackle bolts for play. Because four bushings are needed per vehicle, replace all of them together so the front end wears evenly.
Before reassembly, clean the shackle bolts and sleeves, and confirm they are straight and not corroded. Fit the new bushings with the vehicle’s weight off the suspension, then tighten the hardware once the vehicle is back on the ground.
- Inspect bushings for cracks and splitting
- Replace shackle bolts that show play
- Replace the four bushings together
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0648594 |
| UPC | 70000673960 |
| Position | Front |
| Material | Rubber |
| Type | Shackle bushing |
| Quantity required | 4 per vehicle |
| Drivetrain | 4 wheel drive |
Vehicle fitment
Fit depends on the Jeep year, model and drivetrain, so confirm those against the part before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is a front rubber shackle bushing, and four are needed per vehicle. Plan for four per vehicle.
Not included: Check the full bushing count for your vehicle before starting.







