Overview
The Crown Automotive 52088871AB is a factory-style tie rod tube, also called a tie rod steering adjuster, for the 1999–2004 Jeep Grand Cherokee WJ. The adjuster tube lets the steering linkage be set to the proper length.
Hardware is included with the tube.
Key features
- Tie rod tube, also called a steering adjuster
- Factory-style part
- Hardware included
- Built for the 1999–2004 Grand Cherokee WJ
Adjusting linkage length
A tie rod steering adjuster sets the length of the linkage between the steering box and the front wheels. Changing that length alters toe, which is the front-wheel angle that keeps the tires tracking straight. Because the adjuster is threaded, a small turn changes the setting, so the tube is usually adjusted only after the sleeve ends are secured and the clamps are tight. On a vehicle that has been lifted or has worn joints, the setting drifts over time and benefits from a check.
When replacing the tube, inspect the threads for corrosion and the clamp bolts for stretch or rust. Replace the tube with its matching hardware where possible, since worn clamps can let the adjuster slip under load. Before driving, have the front alignment checked and set, then road-test at low speed to confirm the wheel returns to center. Keep the threaded sections clean and lightly greased to make future adjustments easier.
- Check the threads for rust
- Confirm clamp bolts are tight
- Re-check toe after adjustment
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52088871AB |
| Part type | Tie rod tube (steering adjuster) |
| Style | Factory style |
| Hardware | Included |
| Fit type | Direct fit |
Vehicle fitment
It is for the 1999–2004 Jeep Grand Cherokee, the WJ generation.
Earlier Grand Cherokee generations such as the ZJ are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Tie rod tube with hardware.









