Overview
The Crown Automotive 52090474AB is a sway bar cushion retainer with a center bead, made for the front left position. The retainer is the bracket piece that holds a sway bar cushion in place, so a worn or broken retainer can let the cushion shift on the bar.
Crown Automotive has supplied replacement parts for Jeep vehicles for over 50 years. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Center bead design
- Made for the front left position
- Direct fit described by the manufacturer
- Replacement part from Crown Automotive
Replacing a worn retainer
The cushion retainer is a small part that does a big job. It keeps the sway bar cushion centered and stops the cushion from sliding along the bar when the suspension flexes. When a retainer cracks or its bracket loosens, the cushion can drift, which leads to clunks and uneven bar movement. Replacing the retainer rather than only tightening the bolts is the usual fix when the mounting area looks damaged.
Before pulling anything apart, mark the bar and bracket positions so the new retainer goes back where it was. Clean the bar where the cushion sits, since rust and grit can shorten the life of a new cushion. Tighten the mounting hardware to the torque for your vehicle, and recheck it after the first few drives. Look at the cushion for flattening or cracking during routine service.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52090474AB |
| UPC | 848399085051 |
| Position | Front left |
| Feature | Center bead |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit type for the front left cushion position, so match it to your vehicle’s sway bar setup before ordering.
It is made for the front left position only, so other positions and vehicle generations need separate confirmation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The retainer sits at the front left side of the bar, so work with the vehicle raised and supported on stands, never on a jack alone.
What’s included
This item is a single sway bar cushion retainer with a center bead. Check the package contents against your installation before starting.









