Overview
The Crown Automotive 52088778AA is a black rubber front sway bar cushion for the 2002–2007 Jeep Liberty (KJ). The sway bar cushion is the rubber bushing that lets the front sway bar turn in its mounts, and this part is for the front position.
It fits the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims of the Liberty KJ. Other Jeep models are not covered by this part number.
Key features
- Front sway bar cushion in black rubber
- Crown Automotive part number 52088778AA
- Manufacturer fitment list covers the 2002–2007 Liberty KJ
- Front position
Front cushions on the Liberty KJ
The front sway bar on the Liberty KJ sits in clamp brackets on the frame, with rubber cushions between the bar and the brackets. Those rubber cushions face road spray, salt and heat, so they can dry out and split, especially on vehicles that spend time off road. A split cushion lets the bar knock or rattle in its bracket over uneven ground.
When replacing a front cushion, inspect the bar’s end links and the clamp bolts at the same time. Clean any rust from the bar surface and bracket so the new cushion sits evenly. Rubber can be lubricated lightly for installation with a product made for rubber. After the first drive, re-check the clamp bolts, since rubber settles as it seats.
- Check clamp bolts after the first drive
- Inspect the front end links
- Replace both front cushions when one is worn
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52088778AA |
| UPC | 848399039634 |
| Position | Front |
| Color | Black |
| Type | Rubber |
Vehicle fitment
The list gives the 2002–2007 Jeep Liberty (KJ) in the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims.
The list does not include Grand Cherokee, Wrangler or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One front sway bar cushion in black rubber.
Not included: Check the package contents against your installation before starting, including whether the sway bar and mounting hardware are needed.









