Overview
The Prothane Motion Control 4-1126 is a red sway bar bushing kit for a 22 mm sway bar. Prothane describes its bushings as replacements for worn stock bushings, and the kit includes sway bar link bushings, sway bar bushings, metal brackets and a tube of synthetic grease.
The bushings are polyurethane, designed to resist oils, road salt, chemicals and ozone, and to reduce body roll in corners. Confirm the 22 mm bar size before anything else.
Key features
- Sized for a 22 mm sway bar
- Replacement kit for worn stock bushings
- Polyurethane material per the fitment details
- Metal brackets and synthetic grease included
- Red color
Before you start the job
Replacing sway bar bushings is a job that rewards preparation. Raise the vehicle on stands, not a jack, and remove the bracket bolts before lifting the bar out. Old bushings often stick in their brackets, so a little patience with a bushing puller or a soft mallet keeps the brackets from getting scored. Clean the bar and bracket surfaces before the new bushings go on.
Because the kit is sized for a 22 mm bar, confirm the diameter on the bar you have before taking anything apart. Note which bushing goes where, since front and rear positions can differ. Once seated, tighten the brackets evenly and check that the bar turns freely without binding. Recheck the fasteners after the first few drives, and listen for squeaks that may signal dry bushings.
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 4-1126 |
| UPC | 636169135033 |
| Color | Red |
| Bar size | 22 mm |
| Material | Polyurethane |
Vehicle fitment
It is a direct fit type, so the 22 mm bar size and bushing layout still need to be matched to your vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm whether the kit suits your front or rear sway bar before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing sway bar bushings means working around the bar and its brackets. Support the vehicle on stands before working underneath it.
What’s included
The kit includes sway bar link bushings, sway bar bushings, metal brackets and a tube of synthetic grease.
Not included: The sway bar itself is not part of the kit, so you reuse your existing bar.









