Overview
The Prothane Motion Control 1-1107 is a red polyurethane front sway bar bushing kit for a 1987–1995 Jeep Wrangler (YJ). It replaces worn stock sway bar bushings on a bar with a 1-1/8 inch diameter.
The polyurethane is built to hold up against oils, road salt, chemicals, ozone and smog. The bushings are designed to reduce body roll during cornering.
Key features
- Red polyurethane bushings for the front sway bar
- Includes sway bar link bushings, sway bar bushings and synthetic grease
- Made for a 1-1/8 inch diameter bar
- Manufacturer fitment list covers 1987–1995 Jeep Wrangler (YJ)
Polyurethane bushings and upkeep
Polyurethane is firmer than rubber, so a kit like this keeps the front bar better located under cornering and reduces flex in the mounts. That firmness also means more road noise reaches the cabin, and the bushings rely on lubrication to stay quiet. Use the synthetic grease included in the kit for the bushing contact surfaces.
Wrangler YJ front ends often show wear in the end links as well as the bar bushings, so inspect the link ends when the bar is out. Check the bar for rust before reinstalling and keep the bushing bores clean. Recheck the bracket bolts after the first few drives, because the bushings settle as they seat.
- Squeaks from dry bushings
- Clunks from loose end links
- Rust on the bar at bushing contact points
- Bracket bolts that loosen after installation
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1107, also numbered D/I1-1107 |
| UPC | 70000422593 |
| Position | Front |
| Color | Red |
| Type | Polyurethane |
| Bar diameter | 1-1/8 inch |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The list does not include the TJ, JK or JL Wranglers or other Jeep models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wrangler installations reuse the vehicle’s existing metal brackets, so the brackets are not replaced. Support the vehicle securely before removing the sway bar.
What’s included
Sway bar link bushings, sway bar bushings and a tube of synthetic grease.
Not included: the metal brackets, which are reused on Wrangler applications.









