Overview
The Crown Automotive J0920556 is a steering bell crank repair kit with a 7/8 inch shaft. It is for early Jeep CJ and Willys models from 1949 to 1965.
A bell crank is a lever in the steering linkage. This kit suits servicing that linkage on the CJ5, CJ6, CJ-2, CJ-3, CJ-5 and CJ-6 models it fits.
Key features
- Repair kit with a 7/8 inch shaft
- Fits Willys CJ-2, CJ-3, CJ-5 and CJ-6 models
- Fits 1959–1965 Jeep CJ5 and CJ6 at base trim
- Crown Automotive part number J0920556
Bell crank wear and steering play
The bell crank is part of the steering linkage, so wear in it shows up as play at the steering wheel, a loose feel on center, or a clunk over bumps. Shaft wear and worn bushings are common reasons to repair the crank rather than replace the whole assembly, which keeps the original geometry in place.
Before disassembling, mark the orientation of the parts and check the surrounding linkage, since a worn tie rod end or pitman arm can mimic bell crank wear. After repair, have the front end checked for alignment, because changes in the linkage affect how the wheels track.
- Check for play at the steering wheel before starting
- Inspect tie rod ends and drag link for wear
- Recheck fasteners after the first drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0920556 |
| UPC | 848399079180 |
| Shaft size | 7/8 inch |
| Type | Repair kit |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1949 Willys CJ-2 and CJ-3, 1955–1958 Willys CJ-5 and CJ-6, and 1959–1965 Jeep CJ5 and CJ6 at base trim.
Jeep CJ models after 1965 and the CJ-7 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bell crank work affects the steering linkage. After installing the repair kit, check steering play and linkage movement before driving.
What’s included
A steering bell crank repair kit with a 7/8 inch shaft.
Not included: Check the package contents against your installation before starting.









