Overview
The Crown Automotive JA000857 is a steering bell crank bearing for 1946 to 1952 Willys CJ-2 and CJ-3 models. It fits either the upper or lower position, and two are needed per application.
It fits 1946–1949 Willys CJ-2 and 1949–1952 Willys CJ-3 models. Identify which bell crank position needs replacing before fitting the bearing.
Key features
- Bellcrank bearing for upper or lower position
- Two required per application
- Fits 1946–1952 Willys CJ-2 and CJ-3
- Part number JA000857
Bell crank wear and replacement
The bell crank bearing sits in the steering linkage and lets the bell crank pivot smoothly as the steering moves. Years of grit, moisture and load can dry out the bearing or wear its running surfaces, which shows up as looseness or a clunk when the steering changes direction. Because the bearing works under load, small amounts of wear can quickly make the steering feel vague.
When replacing a bell crank bearing, inspect the bell crank bore, the shaft and the nearby linkage for wear at the same time. Clean the housing thoroughly before fitting, and use fresh grease as the rebuild requires. If one bearing shows wear, the other in the same application is likely close to the same condition, so replacing both keeps the steering balanced.
- Play or clunking when the steering changes direction
- Dry grease or rough feel in the bearing
- Worn bell crank bore or shaft
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | JA000857 |
| UPC | 848399073096 |
| Position | Upper or lower |
| Quantity required | 2 |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1946–1949 Willys CJ-2 and 1949–1952 Willys CJ-3 models.
Later CJ models, including the CJ5, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A steering bell crank bearing for the upper or lower position.
Not included: Check the number of pieces received against the two required per application before fitting.









