Overview
The Crown Automotive 52005653 is a front left stabilizer bar cushion for the 1997–2001 Jeep Cherokee XJ and the 1993–1998 Jeep Grand Cherokee ZJ. It has a 1.02 inch inner diameter and a side cut.
This cushion carries part number 52005653 and is made for the 1997–2001 Jeep Cherokee XJ and 1993–1998 Grand Cherokee ZJ. Check material, outer diameter and quantity against your stabilizer bar before fitting.
Key features
- 1.02 inch inner diameter
- Side cut design
- Front left position
Cushion fit and wear
The cushion is the rubber piece that holds the stabilizer bar to the frame. It allows the bar to rotate as the suspension moves while keeping the bar centered. A cushion that has hardened or split lets the bar move side to side, which can cause rattles and an unsettled feel on rough roads.
A side cut lets the cushion slide onto the bar from the side, which is handy when the bar cannot be fully removed. Before fitting, make sure the cushion sits square on the bar and the mount bracket closes evenly. Check the bracket bolts for tightness after the first drives, since rubber can settle once new parts are installed.
- Look for cracking, splits or flattened rubber
- Check that the cushion sits square on the bar
- Inspect the mount brackets for cracks
- Replace both sides together if one is worn
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 52005653 |
| UPC | 848399013641 |
| Part type | Stabilizer bar cushion |
| Inner diameter | 1.02 inch |
| Cut | Side cut |
| Position | Front left |
Vehicle fitment
The manufacturer fitment list covers the 1997–2001 Jeep Cherokee (XJ) in Classic, Country, Limited, SE and Sport trims, and the 1993–1998 Jeep Grand Cherokee (ZJ) in 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.
The Cherokee XJ entry starts in 1997, so earlier XJ years are not covered by this cushion. Confirm your vehicle’s year, model and trim before ordering.









