Overview
The Crown Automotive short wiper pivot, part J5453957, is a short pivot for a windshield wiper. It is sold without a rod, clip or nut, so those parts must come from your existing wiper setup.
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the part number and the pivot’s length with the original before fitting it.
Key features
- Short pivot design
- Pivot only, with no rod, clip or nut
- Part number J5453957
- It is sold as a direct fit replacement pivot.
Pivot wear and replacement
A wiper pivot holds the wiper arm at the cowl and turns with the arm each time the blades sweep. Its bearing and shaft take constant side loads, so play, looseness or a grinding feel are common signs of wear. A worn pivot can let the arm shift during wiping, leave streaks or cause the blade to chatter against the glass.
Before replacing it, lift the arm and check for movement at the pivot, then look for cracks or bent sections in the housing. Because the pivot and the arm share the load, inspect the arm’s mounting end and the linkage for wear at the same time. Pivots are often replaced together with the arm or rod when the old set has been in service for a long time. Use light grease on moving parts when the design allows it, and keep the mounting nut snug without overtightening it, since excess force can crack the housing.
- Play or looseness at the pivot
- Cracked or bent housing
- Arm that drifts during wiping
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5453957 |
| UPC | 848399065428 |
| Type | Windshield wiper pivot |
| Length | Short |
| Not included | Rod, clip or nut |
Vehicle fitment
Confirm the Jeep year, model and chassis code that use this pivot before ordering. Compare its length and mounting points with the original part.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The pivot only. The rod, clip and nut are not included.












