Overview
The Crown Automotive J0978529 is a front windshield wiper motor for 1968–1975 Jeep CJ5 and CJ6 models, including the CJ5A and CJ6A from 1968. The motor drives the wiper arms and uses a 3-wire plug.
It is a direct fit replacement for the CJ models it covers.
Key features
- Front wiper motor position
- 3-wire plug connector
- Direct fit for the CJ5, CJ5A, CJ6 and CJ6A models from 1968.
- Covers CJ5, CJ5A, CJ6 and CJ6A models from 1968
Wiper motor basics
The wiper motor turns a crank that moves the linkage, and the linkage swings the blades across the glass. On older CJ models the motor sits low on the cowl, where road grime and moisture reach it, so the electrical connections and ground points are a common cause of weak or erratic wiper operation.
Before replacing a motor, check the fuse, the switch and the ground strap, since these often cause the same symptoms. Test the new motor with the wiper switch on and the linkage disconnected to confirm it runs smoothly. Keep the wiring harness clean and dry to help the new connector last.
- Test the switch and fuse before condemning the motor
- Inspect the ground connection at the body
- Confirm the park position after reconnecting the linkage
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0978529 |
| UPC | 848399056655 |
| Position | Front |
| Connector | 3-wire plug |
| Fit type | Direct fit |
Vehicle fitment
Listed fitment: 1968–1975 Jeep CJ5 (Base, Renegade); 1968 Jeep CJ5A (Base); 1968–1975 Jeep CJ6 (Base); and 1968 Jeep CJ6A (Base).
Later CJ7 and Scrambler models and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The motor uses a 3-wire plug, so check that it matches the wiring harness on your vehicle before installing. Disconnect the battery before you work on the wiper wiring.
What’s included
Check your original motor’s mounting hardware and linkage arm against the new motor before installing.









