Overview
The Crown Automotive 55157112AB is a left or right push-type retainer for the front and rear fascia of 2007–2009 Dodge Durango and 2005–2010 Jeep Grand Cherokee (WK) vehicles.
A complete set uses 2 retainers at the front and 4 at the rear.
Key features
- Left or right retainer
- Push-type design
- Front fascia: 2 required
- Rear fascia: 4 required
Working with push-type fascia clips
Push-type retainers are pressed through a hole in the fascia or bumper support and locked by barbs or a center pin. They release when the pin is pressed and pulled out, which is why the pin should be checked before removal. Pressing a damaged clip into place often leaves it loose, so inspect each one before reuse.
Because front and rear positions use different counts, sort the clips into bags as you remove them and label the side and position. This keeps the left and right parts from being mixed up and makes the reinstall quicker. Test each retainer by hand after seating it to confirm it holds the fascia without movement.
- Sort clips by front, rear, left and right
- Check center pins before pressing them in
- Replace clips with broken barbs
- Recheck fascia alignment after the final clip
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55157112AB |
| Type | Push-type retainer |
| Side | Left or right |
| Application | Front and rear fascia |
| Front quantity | 2 required |
| Rear quantity | 4 required |
Vehicle fitment
It fits 2007–2009 Dodge Durango in the Adventurer, Limited, Limited Hybrid, SE, SLT and SXT trims, and 2005–2010 Jeep Grand Cherokee (WK) in the 65th Anniversary Edition, Laredo, Limited, Overland and SRT8 trims.
Dodge Durango years outside 2007–2009 and Grand Cherokee years outside 2005–2010 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front and rear positions need different counts, so set aside 2 front and 4 rear retainers before starting, and confirm left or right for each position.
What’s included
Push-type retainers. Check the package count against the front and rear quantities before starting.









