Overview
The Crown Automotive 68004181AB is a driver-side parking and turn signal light assembly for 2007–2017 Jeep Patriot models in the trims below. The position is front left, and the type is a light assembly.
A light assembly is the complete unit that holds the lamp, so it is a larger part than a lens alone. This unit is marked without hatchback, so check that against your vehicle’s body style before installing.
Key features
- Front left (driver side) position
- Parking and turn signal light assembly
- It fits the 2007–2017 Jeep Patriot.
- Product note: without hatchback
Headlamp and signal wiring
A complete light assembly brings its own socket and connector, but the wiring behind it is still the vehicle’s. Corrosion at the connector is a common reason a new assembly flickers or stays dim. Before removing the old unit, look at the plug for green residue, bent pins or melted insulation. Those signs point to a wiring fault that a new assembly will not fix.
Seal the mounting area carefully. Moisture inside the housing causes fogging and can damage the bulb socket. Use the factory gasket or a matching replacement, and avoid overtightening the fasteners because plastic tabs crack easily. After installation, test the parking and turn signal functions with the headlights on and off to confirm both work as expected.
- Inspect the connector before removing the old unit
- Replace a cracked or hardened gasket
- Test both parking and turn functions
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | CRO68004181AB |
| Part type | Parking and turn signal light assembly |
| Position | Front left (driver side) |
| Body note | Without hatchback |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2017 Jeep Patriot in 75th Anniversary, Latitude, Latitude X, Limited and Sport trims.
Other Jeep models, such as the Compass and Wrangler, are not in this list. Check the without hatchback note against your vehicle’s body style. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One driver-side light assembly is included. Confirm bulbs and mounting hardware against your installation before starting.
