Overview
The Crown Automotive J8128931 is a clear parking lamp socket for 1984–1993 Jeep Cherokee (XJ), 1986–1992 Jeep Comanche and 1987–1995 Jeep Wrangler (YJ) models. It is an individual piece that needs splicing into the existing lamp wiring.
Trims run from Base and Laredo up to Limited, Sahara and XLS, depending on the model.
Key features
- Clear socket color
- Socket type for a parking lamp
- Splicing required into existing wiring
- Direct fit designation for listed XJ, Comanche and YJ models
- Part number J8128931 and UPC 848399069877
Splicing and socket care
A socket that needs splicing is only as reliable as its connections. Use proper crimp connectors or solder joints sealed with heat-shrink tubing, and keep every joint away from hot engine parts. Route the wire with clips so it cannot rub or pull at the splice when the vehicle flexes.
Because the socket is a single piece, it should be checked for cracks and burned areas before you commit to splicing. Test the circuit with the lamp before reinstalling the housing, and make sure the bulb base seats firmly. Corrosion at the contacts is the most common reason a parking lamp goes dim.
- Use sealed crimp connectors or solder joints
- Route wire clear of moving parts
- Check the socket for cracks or burns
- Test the circuit before reinstalling
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8128931 |
| UPC | 848399069877 |
| Color | Clear |
| Type | Socket |
| Installation | Splicing required |
| Quantity | Individual piece |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1984–1993 Jeep Cherokee (XJ), 1986–1992 Jeep Comanche and 1987–1995 Jeep Wrangler (YJ) models, across the trims from Base and Laredo to Limited, Sahara and XLS.
Wrangler TJ and later models, and Cherokee models outside the XJ years, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Splicing is required, so the socket must be joined to the existing lamp wiring. Disconnect the battery before working on any wiring.
What’s included
One clear parking lamp socket comes in each package. Confirm you have a lens and bulb before starting the splice.














