Overview
The Omix-ADA oxygen sensor, part number OAI17222.08, is a replacement O2 sensor that installs before the catalytic converter. It fits the 1984–1986 Jeep Cherokee (XJ) with the 2.8-liter six-cylinder engine and the 1987–1990 Jeep Wrangler (YJ) with the 4.2-liter engine.
The sensor replaces OE number 53000886 and is listed with an upper position. Omix-ADA presents it as a direct-fit part.
Key features
- Installs before the catalytic converter
- Listed with an upper position
- Covers the 2.8-liter six-cylinder Cherokee XJ and the 4.2-liter Wrangler YJ
- Replaces OE 53000886
Signs of a failing sensor
An upstream oxygen sensor reads exhaust content before the catalytic converter and feeds that signal to the engine computer, which adjusts fuel delivery. When the signal drifts or the heater fails, the mixture can run rich or lean, which often shows up as poor fuel economy, rough idle or a check engine light.
Sensors age from heat cycles and from contamination such as oil or coolant burning in the exhaust, and leaded or silicone-based fuel additives can also foul them. Before replacing a sensor, check for exhaust leaks ahead of it, since a leak can cause a false reading. A scan tool showing sluggish switching often points to a worn sensor.
- Poor fuel economy
- Rough idle or hesitation
- Check engine light with sensor codes
- Exhaust leak near the sensor
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | OAI17222.08 |
| Position | Upper, before the catalytic converter |
| Engine (Cherokee XJ) | 2.8-liter 6 cylinder |
| Engine (Wrangler YJ) | 4.2-liter |
| OE replacement number | 53000886 |
Vehicle fitment
It fits the 1984–1986 Jeep Cherokee (XJ) in Base, Chief, Laredo and Pioneer trims, and the 1987–1990 Jeep Wrangler (YJ) in Base, Islander, Laredo, S, Sahara and Sport trims.
Cherokee models after 1986 and Wrangler models before 1987 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This sensor installs before the catalytic converter, so confirm the location of your existing sensor before removing it. Let the exhaust cool before working on the sensor.
What’s included
The package contains one oxygen sensor. Confirm the connector matches your existing sensor before installing.









