Overview
The Crown Automotive J4007541 is a hood cushion bumper that sits between the hood and fender. Two are required.
Crown Automotive is a manufacturer and distributor of replacement parts for Jeep vehicles, with over 8,000 different part numbers including many factory-discontinued items. This hood cushion bumper is a direct fit part.
Key features
- Hood cushion bumper
- Hood to fender location
- 2 are required
- Direct fit listing
- Replacement part from a Jeep parts manufacturer and distributor
Hood bumper placement and wear
A hood cushion bumper sits between the hood and the fender and keeps the panels from knocking together over bumps and at speed. When it is missing or flattened, the hood can rattle, the paint can wear at the contact point and the latch can take extra stress. Because two bumpers are used in this location, both should be checked for the same height and compression.
Hood bumpers are exposed to heat, sun and road vibration, so they tend to harden, flatten or crack with age. Look at the contact faces and the seating areas on both the hood and the fender. Replacing both bumpers at the same time helps keep the hood sitting level and reduces the chance of uneven wear.
- Check both bumpers for matching height
- Look for flattening, cracks or torn bases
- Inspect the paint on the hood and fender at the contact points
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J4007541 |
| UPC | 848399062304 |
| Product type | Hood cushion bumper |
| Location | Hood to fender |
| Quantity required | 2 |
| Fitment type | Direct fit |
Vehicle fitment
This is a direct fit bumper from a Jeep parts maker. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm that the bumper’s size and location match the one you are replacing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test-fit the part before any cutting, drilling or finishing. Tighten fasteners to firm, even tension and re-check them after the first miles of driving. If the part needs cutting or drilling, wear eye protection and treat bare edges to prevent corrosion. Check local regulations on vehicle modification. Make sure every fastener is tight before the part carries any load.
What’s included
One hood cushion bumper, part number J4007541. Two are required.
Not included: A second bumper, since 2 are required.









