Overview
The Crown Automotive J0802925 is a flywheel starter ring gear with 129 teeth for the 134 4-cylinder engine. It fits the 1953–1971 Jeep CJ3, CJ5, CJ6, Willys CJ-3, CJ-5 and CJ-6, the FC150, the trucks, utility vehicles and wagons in that period, and the Willys sedan delivery.
The ring gear is the toothed part around the flywheel that the starter drive engages to crank the engine. Check the tooth count and engine on your own flywheel before buying, since the match depends on both.
Ring gear wear and starter engagement
The ring gear is the toothed ring on the flywheel that the starter pinion engages to turn the engine. Worn or chipped teeth can cause slipping, grinding or a starter that spins without cranking. Because the ring gear is mounted to the flywheel, inspection usually means removing the transmission or the clutch assembly.
When replacing a ring gear, check the flywheel surface for heat cracks and confirm that the starter pinion and motor are in good condition. A new ring gear that meshes poorly can wear quickly, so look at the tooth pattern after installation. Keep the starter mount tight and check the wiring to the starter solenoid. Rotate the engine by hand to confirm the teeth engage cleanly before running it.
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J0802925 |
| UPC | 848399053579 |
| Type | Flywheel starter ring gear |
| Teeth | 129 |
| Engine | 134 4-cylinder |
Vehicle fitment
It fits the 1959–1960 Jeep CJ3, the 1959–1971 Jeep CJ5 and CJ6, the 1966–1968 CJ5A and CJ6A, the 1957–1964 FC150, the 1956–1963 Jeep Truck, the 1961–1963 Universal Truck, the 1961–1962 Utility, the 1956–1963 Utility Wagon, and the Willys CJ-3, CJ-5, CJ-6 and Sedan Delivery models from 1953 to 1958.
Wrangler and Cherokee models, and Jeep vehicles built after 1971, are outside this fitment. Check your vehicle’s year, model and trim before buying.









