Overview
The Crown Automotive 53010624AC is a complete engine oil pump drive for the 4.0L 6 cylinder engine. It is a direct fit for the 2005–2006 Jeep Wrangler (TJ), including the 65th Anniversary Edition, Rubicon, SE, Sport and X versions.
The unit is identified by part number 53010624AC. Check the UPC and installation steps against your service procedure before starting.
Key features
- Supplied as a complete unit
- Designed for the 4.0L 6 cylinder engine
- Named as an engine oil pump drive
- Direct fit for 2005–2006 Wrangler (TJ) trims
Signs the drive needs service
The oil pump drive transfers rotation from the engine to the oil pump, so wear or play in the drive shows up as low oil pressure or a whine at the front of the engine. Pump drives do not usually fail suddenly, so a change in engine noise or a drop in pressure at idle is the time to check. Look for metal shavings around the oil filter and drain plug.
Replacing the drive is a good time to inspect the oil pump itself and the timing components nearby. Clean the mating surfaces and use the correct torque on the fasteners, since a loose drive can slip and cause damage. Keep records of oil changes so any pressure change is easier to trace.
- Check oil pressure at idle after installation
- Inspect the oil pump while the drive is out
- Look for debris in the oil filter after the first change
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 53010624AC |
| Engine | 4.0L 6 cylinder |
| Supplied as | Complete unit |
Vehicle fitment
It fits 2005–2006 Jeep Wrangler (TJ) models, including the 65th Anniversary Edition, Rubicon, SE, Sport and X trims.
Wrangler (TJ) models outside 2005–2006 and the Wrangler (LJ) and (JK) are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
It is a complete unit. Check gaskets and mounting hardware against your installation before starting.









