Overview
It is a clutch pedal bushing, part 4446361, for the 1999–2001 Jeep Cherokee (XJ), the 1993–1998 Jeep Grand Cherokee (ZJ) and the 1998–2006 Jeep Wrangler (TJ). Two bushings are needed per application.
A pedal bushing sits at the pivot where the clutch pedal turns on its shaft, so worn bushings can make the pedal feel loose. Compare the new bushing with the old one for size and condition before installing it.
Key features
- Two bushings required
- Clutch pedal bushing for the pedal pivot
- Fits Cherokee XJ, Grand Cherokee ZJ and Wrangler TJ models
- Crown Automotive part number 4446361
Pedal pivot wear and feel
The clutch pedal pivots on a shaft, and the bushings at that pivot carry the load every time the clutch is used. As they wear, the pedal can develop play, a clunk when released, or a slight wobble side to side. These symptoms often appear gradually, so comparing the pedal’s movement with a known good example is a useful check.
Before fitting new bushings, inspect the pedal shaft and the bore in the pedal arm for scoring or looseness. Light marks can be cleaned, but deep grooves will wear a new bushing quickly. Lubricate the bushing surfaces as the installation calls for, and check that the pedal returns smoothly once the job is finished.
- Play or clunk at the pedal pivot
- Pedal wobble side to side
- Scoring on the pedal shaft
- Loose fit in the pedal arm bore
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 4446361 |
| UPC | 849603004257 |
| Product type | Clutch pedal bushing |
| Quantity required | 2 |
Vehicle fitment
It fits the 1999–2001 Jeep Cherokee (XJ), the 1993–1998 Jeep Grand Cherokee (ZJ) and the 1998–2006 Jeep Wrangler (TJ).
Cherokee years before 1999 and Grand Cherokee years after 1998 are not covered, so check your own year against the range.
What’s included
Two bushings are needed for each application. Check the package contents against your installation before starting.









