Overview
The 10.5 inch clutch disc is built for 304 V8 engines. It fits 1976–1979 Jeep Cherokee (SJ), CJ5, CJ7, J10, J20 and Wagoneer (SJ) models.
It is a direct fit, and the part number is J5354689 with UPC 848399063318.
Key features
- 10.5 inch disc diameter
- Built for 304 V8 engines
- Covers 1976–1979 Jeep SJ, CJ, J-series and Wagoneer models
- Fitment marked as direct fit
Clutch wear and related parts
The clutch disc wears through friction every time the clutch engages, so its lining thins over time. Signs of wear include slipping under load, a burning smell on hills, and a pedal that engages high or chatters. Since the disc is pressed against the flywheel by the pressure plate, wear on one part often means the others are worn too.
Replacing the disc is a good time to inspect the pilot bearing, the throwout bearing and the flywheel surface. A glazed or scored flywheel will cause the new disc to slip, and a worn pilot bearing can make the transmission input shaft wobble. Clean the splines and lubricate them lightly before installing the disc, and use an alignment tool so the disc centers correctly.
- Check the flywheel for heat marks or grooves
- Replace the pilot bearing during the same job
- Inspect the throwout bearing and release fork
- Use an alignment tool to center the disc
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5354689 |
| UPC | 848399063318 |
| Disc diameter | 10.5 inch |
| Engine | 304 V8 |
| Fitment years | 1976–1979 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1979 Jeep Cherokee (SJ), CJ5, CJ7, J10, J20 and Wagoneer (SJ).
Model years after 1979 and all Wrangler models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the engine is a 304 V8 before fitting the disc, since it is designed for that engine.
What’s included
One clutch disc.
Not included: a pressure plate, which is needed to complete the clutch.









