Overview
The Crown Automotive J4007571 is a front body mount bolt, a 1/2 inch-13 x 3-3/4 inch flanged Grade 8 bolt, for the 1987-1995 Jeep Wrangler YJ and the 1997-2006 Wrangler TJ. Its alternate part number is CROJ4007571.
Six of these bolts are required for the front body mounts. It is a direct fit replacement part. Crown Automotive makes and distributes replacement parts for Jeep vehicles, with over 8,000 part numbers, including many factory-discontinued items, and offers a warranty.
Count the front body mounts on your Jeep and compare that number with the six bolts needed before ordering. Because this is a Grade 8 flanged bolt, use the size and grade given here rather than lower-grade hardware-store substitutes.
Key features
- Front body mount bolt
- 1/2 inch-13 thread, 3-3/4 inch long
- Flanged head
- Grade 8 bolt
- 6 required
- Direct fit replacement part
Before you replace body mounts
Body mount bolts carry the weight of the body where it meets the frame, so they work under constant load and vibration. On a Wrangler that has seen years of off-road use, the threads and flange can corrode or stretch, and a tired bolt can allow the mount to shift. Inspect the surrounding bracket and rubber mount for cracks, crushed bushings or elongated holes before fitting new hardware, because a new bolt cannot correct a damaged mount.
Most owners replace body mount hardware while the body is supported, one mount at a time, so the frame stays aligned. Check threads for rust before reuse, clean the mating surfaces and tighten to the torque your service manual gives for your model year. Re-check the fasteners after the first few drives over rough ground, since bolts can settle as the rubber compresses.
- Look for rust or thread damage on the frame nut
- Replace any mount that is cracked or crushed
- Keep the body supported until every mount is tightened
- Note the position of each mount before removing it
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J4007571 |
| UPC | 848399089431 |
| Product type | Front body mount bolt |
| Alternate part number | CROJ4007571 |
| Thread size | 1/2 inch-13 |
| Length | 3-3/4 inch |
| Head style | Flanged |
| Grade | Grade 8 |
| Quantity required | 6 |
| Fit type | Direct fit |
Vehicle fitment
It fits the Wrangler TJ and the Wrangler YJ.
- 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X)
- 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport)
It fits the Wrangler TJ (1997-2006) and Wrangler YJ (1987-1995). Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Six bolts are needed, so count the front body mounts and check the package contents against your installation before starting. Replace body mount hardware one mount at a time, supporting the body as you go.
What’s included
Six bolts are required for the front body mounts. Check the package contents against your installation before starting.









