Overview
Crown Automotive’s accelerator throttle cable, part number J5356483, carries pedal movement to the throttle. It is marked Direct Fit, and the brand’s own copy presents it as a replacement part for Jeep vehicles.
Compare the cable with the original part before installing it, and confirm the application for your vehicle.
Pedal feel and idle return
Pedal feel reflects the cable’s condition. A smooth, consistent pull means the sheath is open and the inner wire is free, while a heavy or uneven pull often points to a kink or a worn end fitting. Because the cable is the only physical link to the throttle, small problems show up quickly at the pedal.
When comparing a new cable with the old one, focus on the parts that wear: the pedal end, the throttle end and the bends in between. Matching length and end style prevents the cable from pulling the throttle open early or leaving slack at the pedal. Run the pedal through its full travel after installation and watch the throttle return to idle without hesitation.
- Compare end fittings before installing
- Watch for slack or bind at full pedal travel
- Keep the cable away from sharp edges
- Check grommets where the cable enters the firewall
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J5356483 |
| UPC | 848399063745 |
| Part type | Accelerator throttle cable |
| Fitment | Direct Fit |
Vehicle fitment
The cable is marked Direct Fit. Confirm your vehicle’s year, model and trim before ordering, then compare it with the original part.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the routing for kinks and rub points before the first start, since a binding cable can keep the throttle from returning to idle.
What’s included
Check the package contents against your installation before starting, especially any clips or brackets the old cable used.












