Overview
The Curt Manufacturing clevis grab hook, part number 81340, is a heavy duty hook rated for a 3900 lbs. work load. It has a grade 43 rating and a 5/16 in. diameter, and it is not tied to any particular vehicle.
Key features
- Heavy duty clevis grab hook
- 3900 lbs. work load
- Grade 43 rating
- 5/16 in. diameter
Choosing a rigging hook
A clevis grab hook is a common choice for winch lines and recovery rigging because it grips a ring or loop and closes around it with a pin. Before each use, look over the throat, the bowl and the pin area for bending, a spread opening, cracks or flat spots worn by rubbing. Any hook showing these signs should come out of service, since a damaged hook can fail well below its normal load. Keep the pull in line with the hook’s axis when possible, because side loading places stress on the throat that it is not built to carry.
Choosing a hook comes down to matching the work load to your winch line and the heaviest pull you plan to make. Keep the hook clean and dry, and store it where it will not be struck or dragged across rocks. After a recovery, check the pin for smooth movement and remove grit that could make it bind. Pair the hook with rigging of similar rating so that the weakest component in the chain is not the hook by accident.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 81340 |
| UPC | 612314103409 |
| Type | Clevis grab hook |
| Work load | 3900 lbs. |
| Grade | 43 |
| Diameter | 5/16 in. |
Vehicle fitment
This is a universal winch hook, not a vehicle-specific part, so no vehicle list applies. Check that the 3900 lbs. work load suits your winch line and rigging before use.









