Overview
The Warn 28626 is a 1/2in. safety clevis hook for winch rigging. It is a universal fit, so the right match depends on the winch model rather than a specific ATV or truck. Have the winch’s model number, battery voltage and serial number ready before you order.
Key features
- 1/2in. size
- Safety clevis design
- Listed in Warn winch hook and hardware kits
- Warn part number 28626
Choosing a rigging hook
A winch hook is the point where the line connects to the load, so it takes repeated shock loads in ways a simple tow strap does not. A safety clevis hook uses a latch to keep the line from sliding off during a pull. When you pick a hook, match its size to the line and shackle you already use, and make sure the throat has room for the eye of the rope without binding. Avoid mixing hooks from different sources into one rig unless each piece is suited to the same job.
Over time the latch spring can weaken, the tip can open, and the throat can bend or wear at the bearing surface. Look for gaps that do not close, grooves, flat spots, or cracks around the hook shank. Clean out grit and dried mud before storing the winch, and keep the latch moving freely with a light lubricant. A hook that has been overloaded should be replaced rather than straightened.
- Check the latch closes fully before every pull
- Replace a hook that shows bending or cracks
- Keep the line and hook matched in size
Specifications
| Brand | Warn |
|---|---|
| Part number | 28626 |
| UPC | 1274828626 |
| Size | 1/2in. |
| Type | Safety clevis hook |
| Fitment listed | Universal Fit |
Vehicle fitment
It is a universal fit and suits winch hook use. Check that it suits your winch line and rigging before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inspect the hook and its safety latch before each use, and replace the hook if the latch does not close fully.
What’s included
Only the safety clevis hook is named for this part.









