Overview
The CF018522 is a Series I clutch kit, an entry-level Centerforce design offered as a stock replacement with a performance edge. It suits stock engines and mild power increases from minor bolt-on modifications.
The clutch uses Centerforce centrifugal weights where applicable and premium friction materials.
Key features
- Entry-level Series I design
- Patented centrifugal weights where applicable
- Premium friction materials
- Suited to stock engines and mild bolt-on power increases
Stock replacement and upgrades
A stock replacement clutch is designed to match the original engagement and feel. On a stock engine that means predictable pedal travel and steady release, which an entry-level design is built to provide. Where a vehicle has been modified, the clutch should match the new power level, since a stock-style clutch can slip under higher torque.
Clutch wear shows up as slipping under load, a high engagement point, a burning smell, or vibration when pulling away. When the clutch is out, inspect the flywheel for heat marks and grooves, check the pilot bearing and release bearing, and look at the pressure plate fingers. Replacing the release bearing with the clutch is a common practice because it is accessible at the same time.
- Match the clutch to the engine’s current output
- Inspect the flywheel for grooves and heat marks
- Replace the pilot bearing if it is worn
- Check the release bearing for noise when the pedal moves
Specifications
| Brand | Centerforce |
|---|---|
| Part number | CF018522 |
| Series | Series I |
| Fitment years | 1985–1988 and 1992–1995 (4Runner and Pickup); 1995–2004 (Tacoma) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1985–1988 and 1992–1995 Toyota 4Runner, the 1985–1988 and 1992–1995 Toyota Pickup, and the 1995–2004 Toyota Tacoma.
Toyota years outside these ranges, and 1989–1991 4Runner and Pickup models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A Series I clutch kit. Check the package contents against your installation before starting.









