Overview
The Bushwacker 31913-11 is a set of four Extend-A-Fender flares for the 1996 to 2002 Toyota 4Runner. The set covers the front and rear and adds up to 1.25 inches of tire coverage for trucks running oversize wheels and tires. It fits the Base, Limited and SR5 4Runner models in those years.
The flares are made from Dura-Flex 2000, a material designed to resist chalking, cracking and warping, with a UV protected surface. The OEM-style matte black smooth finish can be left as-is or painted to match the body. The front and rear pieces arrive together as one set of four.
Key features
- Set of four flares for front and rear positions
- Up to 1.25 inches of tire coverage from debris
- Installs neatly in minutes with minimum drilling
- 100 percent UV protected Dura-Flex 2000 that resists chalking
- OEM matte black smooth finish that is easy to paint
- Made in the USA with a limited lifetime warranty
Choosing oversize tire clearance
Fender flares extend the body over the tire, which matters most when the tire grows past the stock fender line. Off pavement, the flare keeps mud, gravel and spray from being thrown onto the doors and rocker area. Coverage is only one part of the picture. Tire width, wheel offset and suspension height all change how much of the tire sits outside the fender, so measure your own setup before choosing a flare size.
Flares bolt to the existing fender lip, so the paint along the edges and the sheet metal see the most handling during install. Clean the mounting surfaces, mark each hole with masking tape, and work slowly through the first fastener. Plastic flares flex more than steel under load, so check the fasteners again after the first few trail runs and retighten any that have loosened.
- Measure tire width and height before ordering
- Check clearance at full steering lock
- Replace damaged fasteners instead of reusing them
- Re-check mounting points after rough trail days
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 31913-11 |
| UPC | 90689104649 |
| Position | Front and rear |
| Width and tire coverage | 1.25 inches |
| Quantity | Set of 4 |
| Fit type | Direct fit |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Model years | 1996 to 2002 Toyota 4Runner |
Vehicle fitment
It fits the 1996 to 2002 Toyota 4Runner. Later 4Runner generations and the 1989 to 1995 pickups are not covered by this fitment.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushwacker says minimum drilling is needed, so the set is not fully drill-free. Follow the instructions supplied with the set for hole placement.
What’s included
Four Extend-A-Fender flares for the front and rear.









