Overview
The Bushwacker Ford Pocket Style Front Fender Flares, part number 20083-02, are a pair of front flares made for off-road Ford trucks. They are designed to complement oversized tires and high-clearance lift kits. Confirm fit for your year, model and trim before ordering.
Pocket Style flares carry recessed stainless steel bolts for a bolt-on appearance. Width/coverage is 2 inches past the body line. Bushwacker molds them from thick, warp-resistant Dura-Flex 2000 material, which it describes as UV protected so the matte black finish will not chalk.
The smooth surface can be painted to match or accent the body color. The front pair installs with no drilling required.
The front flare sits ahead of the front wheel, so its 2-inch coverage applies to the front tire. The rear pair is sold under a different part number, so keep the two positions separate when planning the fit.
The Pocket Style design suits oversized tires and high-clearance lift kits. If your truck is lifted, check the installed height against the flare before mounting.
Key features
- Front pair with 2 inches of width/coverage
- Recessed stainless steel bolts for a bolt-on look
- Installs easily with no drilling required, per the manufacturer
- Dura-Flex 2000 material, thick and warp-resistant
- OEM matte black finish, easy to paint
- Made in the USA
Front flares and steering clearance
Front fender flares change the space around the front tire, so they interact with steering, the front bumper and the inner fender more than rear flares do. When the wheel turns, the tire moves toward the flare edge, so clearance at full left and full right lock matters most. A flare that clears in a straight line may still rub during a sharp turn.
Look for signs of wear at the mounting points after rough trail use, including loose bolts, cracked edges and paint chips where the flare meets the fender. Recheck the hardware after the first few drives, and retest steering clearance any time the tire size or lift height changes. Keep the front and rear positions matched when painting so the finish looks uniform.
- Test steering at full lock before final tightening
- Inspect bolts and edges after rough trail use
- Recheck clearance after any lift or tire change
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 20083-02 |
| UPC | 90689112651 |
| Position | Front |
| Quantity | Pair |
| Width/coverage | 2 in |
| Material | Dura-Flex 2000 |
| Finish | OEM matte black, paintable |
| Mounting | Recessed stainless steel bolts |
| Companion parts | Rear pair 20084-02, or set 20931-02 |
Vehicle fitment
This front pair is made for the Ford Super Duty. Confirm fit for your truck’s year, model and trim before ordering.
Do not assume these front flares fit every Super Duty year. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of front Pocket Style fender flares with recessed stainless steel bolts.








