Overview
The Bilstein 5100 Series 33-196619 is a 46mm monotube steering damper for the front of 2011–2016 Chevrolet Silverado 2500 HD and 3500 HD trucks, along with the GMC Sierra 2500 HD and 3500 HD in the same years. It is a single damper, sold as a stabilizer only.
It is a gas pressure monotube design that avoids cavitation and foaming in the damping oil. The valving is digressive, and the damper reduces steering component vibration and wear. The zinc finish uses Bilstein’s Triple C process for corrosion resistance.
Brackets are not included. This line comes in 36mm and 46mm sizes, so the 46mm version here is the one to match against the damper you are replacing.
Key features
- 46mm monotube steering damper
- Gas pressure design that eliminates cavitation and foaming
- Digressive valving for precise steering damping
- Zinc corrosion-resistant finish
- Single front unit
Front steering damper service
A steering damper on a heavy-duty front axle works with the tie rods, drag link and ball joints to control steering movement. When these parts are worn, the damper may take more load than it was designed for, which can shorten its life. Replacing a damper without checking the linkage can leave the same vibration in place, so inspect the steering components while the damper is removed.
Large tires and changes in wheel offset increase the forces on the steering system. Keep this in mind when selecting parts for a truck that carries a lift or larger wheels. A new damper should be installed with the wheels straight and the steering centered, and the mounting hardware should be tightened to the vehicle’s specification. Check the damper again after the first few drives.
- Inspect tie rod ends and ball joints for play
- Check the wheel bearings for noise or looseness
- Look for uneven tire wear that suggests alignment problems
- Confirm the damper does not rub or bind at full lock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-196619 |
| Shock series | 5100 Series |
| Type | Stabilizer only, monotube |
| Position | Front |
| Body | 46mm monotube |
| Single or dual | Single |
| Boot | Not included |
| Brackets | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2011 through 2016 Chevrolet Silverado 2500 HD and 3500 HD, and the 2011 through 2016 GMC Sierra 2500 HD and 3500 HD.
Silverado and Sierra 1500 models, and HD trucks outside the 2011 to 2016 model years, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One steering damper.
Not included: Brackets and the shock boot are not included.
Installation notes
The brackets must be sourced separately, so check the mounting points on your truck before you order the damper.









